
Copper prism springs ensure stable operation and high‑quality distillation. In this guide we will show how to choose the right springs, how to install them and why you should opt for Padew’s product.
Why choose copper prism springs from Padew?
Copper springs manufactured in Poland are characterised by high purity and a uniform structure. Copper provides excellent thermal conductivity, resulting in even column heating.
- Quality guarantee – each product undergoes dimensional inspection.
- Corrosion resistance – copper does not react with alcohol or acids.
- Easy replacement – standard sizes fit most distillers.
How to select the proper capacity of a prism spring?
Capacity selection depends on the volume of the distiller and the requirements of the distillation process. Below are the most common options.
| Spring capacity | Distiller volume | Recommended use |
|---|---|---|
| 0,25 l | up to 5 l | Small home distillers |
| 0,5 l | 5 – 10 l | Medium workshop installations |
Products available in Padew’s range:
Step‑by‑step: installing the spring in the distiller column
Step 1 – preparing the column
Make sure the column is clean and dry. Remove the old packing and any residues.
Step 2 – choosing the spring size
Check that the selected capacity matches your distiller’s volume (see table).
Step 3 – inserting the spring
Gently feed the spring, avoiding excessive compression. It should sit freely without blocking vapor flow.
Step 4 – checking for leaks
After installation run a test distillation cycle and verify that there are no leaks at the connections.
How to properly maintain copper springs?
Regular maintenance extends spring life. Recommendations:
- After each cycle thoroughly rinse the column with distilled water.
- Every few months perform a chemical cleaning (e.g., citric acid solution).
- Inspect the spring for deformation or wear.
Which accessories complete a distillation set?
Enhance your setup with items that improve safety and efficiency:
- Stainless steel distiller
- Distillation column
- Double heaters and temperature regulators
- Column packing – springs and scrubbers
Summary of key information
- Even heating and high distillate purity thanks to copper springs.
- Choosing 0,25 l or 0,5 l capacity depends on distiller size.
- Installation is straightforward – just a clean column and the right size.
- Regular upkeep prolongs spring lifespan.
- Complete kits available at Padew ensure full functionality.
Frequently asked questions
Can copper springs be used in acid‑resistant distillers?
Yes, copper does not react with acids, so copper prism springs are safe in acid‑resistant columns.
How often should the springs be replaced?
Check them every 12 months; with intensive use replace every 6 months.
Do copper springs affect the flavor of the alcohol?
Copper does not impart unwanted aromas and, thanks to uniform heating, improves the clarity of the distillate.
Can I use a copper spring in a stainless‑steel distiller?
Yes, the springs are designed for stainless‑steel columns and provide optimal heat exchange.
Produkty z artykułu
Reference: miedz-0.25
Brand: Hurtownia, Sklep Padew.pl
PRISMATIC SPRINGS 0.25 L COPPER FILLING
Reference: miedz-0.5
Brand: Hurtownia, Sklep Padew.pl


